|
Hydro
Cyclone Cones are basically to separate liquid from
earth. During suction it is very critical to have a
system that will operate efficiently.
We manufacturer
Hydro Cyclone Cone Assemblies i.e. Desanders and
Desilters. The separation process is carried out by
employing centrifugal forces. The angle of the fluid
entry has been specifically designed to facilitate the
flow and separation. The Cones are made of high
durameter polyurethane with optional steel inserts,
which ensure consistent productivity.
Desander Cones remove abrasive, coarse solid
particles upto 60 microns.
Desander Cones are available in 10" attachments
with a 4" inlet and a 6" outlet.
Desilter Cones remove fine sand and silt down to
20 microns.
Desilter Cones are available of 4" size that have
a 2" inlet and a 2" outlet. |
| |
|
PARTS OF
HYDRO CYCLONE CONE ASSEMBLY |
|
Kem-tron Desilter Cones
We have the following cones in our Ex-stock range :
Kem-tron KTL48B Shaker
4" Desilter Cone Assembly |
|
|
|
No. |
Description for 10", 16 or 20" Cone Desilters |
Part No. |
|
1 |
4"
Inlet |
KTH-4-001 |
MRT 1102/108 |
|
2 |
4" Body |
KTH-4-002 |
MRT 1102/107 |
|
3 |
Apex Nut |
KTH-4-003 |
MRT 1102/106 |
|
4 |
Apex Wear Insert |
KTH-4-004 |
MRT 1102/109 |
|
5 |
Stainless Steel
Clamp |
KTH-4-005 |
MRT 1102/110 |
|
6 |
2" Groove Lock
Overflow Elbow |
KTH-GL-203 |
MRT 1102/192 |
|
|
|
|
Derrick 4"
Desilter Cone Assembly |
|
|
|
No. |
Description for 10", 16 or 20" Cone Desilters |
Part No. |
|
1 |
Body |
10523-00 |
MRT 1102/132 |
|
2 |
Circular Cone |
10523-01 |
MRT 1102/134 |
|
3 |
Mud Cleaner Nut |
10523-03 |
MRT 1102/133 |
|
4 |
Elbow |
10523-02 |
MRT 1102/193 |
|
|
|
|
Derrick
10" Desilter Cone Assembly |
|
|
|
1 |
Cone
Top Section |
10 T. S |
|
|
 |
| |
